#PROPRESENTER LOWER THIRDS 1080P#
#PROPRESENTER LOWER THIRDS PRO#
#PROPRESENTER LOWER THIRDS SOFTWARE#
#PROPRESENTER LOWER THIRDS FREE#

I use the UpDownCross to convert to 1080p and record H.264 on the Hyperdeck Mini's SD cards.

Although you have to pay to include streaming to Facebook on their site.įor recording I've had great success with the BMD Hyperdeck Studio Mini and the BMD UpDownCross converter.

#PROPRESENTER LOWER THIRDS FREE#

They say they have 30 free platforms they stream to. Twitch is free.įor one of my clients, I set the Teradek to stream to Restream.io and let it send out to about 18 streaming platforms with their free version. Streaming to YouTube is free, Facebook is free. This unit also records an H.264 video on an SD card if you want it to.

#PROPRESENTER LOWER THIRDS PRO#

I even use it to play out our intro and outro for our 'Sermon only' archive.įor streaming, I like the Teradek VidiU Pro and use it to stream to anywhere. I use my laptop display outputs for key and fill into the ATEM's Downstream keyer. We use an UpDown Cross converter from BMD to get it to the right format for our ATEM switcher.įor live animated titles and lower thirds, I use the app that uses PowerPoint as a character generator.

We split this HDMI signal with a distribution amp, HDMI-SDI converter and run that to our ATEM production switcher upstairs. Our Worship Center iMac runs ProPresenter for our large projector and side screens.

#PROPRESENTER LOWER THIRDS SOFTWARE#

There is software control for this so you can route signals from your computer. HDMI-SDI converters from cameras that don't have SDI outputs. Then convert SDI-HDMI at the TV's with converters powered by USB from the TV. SDI cables from all cameras to the video switcher. Our church also uses a Blackmagic Design Smart Videohub to route signals to all the TV's in our building. Genlocked cameras will reduce this latency. Also keep in mind that if using cameras for IMAG in your Sanctuary/Worship Center, that there will be a slight delay because of processing. You can use an UpDownCross converter to remedy this. It won't scale, but the on board frame synchronizers let you use inputs that don't need to be genlocked. So if it is set up for 1080i 59.94, then all cameras and other inputs arrive at the same format. Keep in mind that most of the BMD ATEM switchers require that all signals arrive in the same format as the switcher. You can customize buttons and your Multiview. The ATEM Switcher software has multiple tabs to control audio sources, media loaded into media players (stills or titles with alpha channel), camera control (if you have Blackmagic Design supported cameras). Such as sending a camera feed to a monitor in your worship center, a 'dirty feed' to your nursery, a 'clean feed' to a recorder that doesn't include lower thirds, etc. Some of the ATEM switchers include AUX outputs so you can send different video feeds to different places. Send a program output to monitors in your church, and to your streaming device. You can switch cameras on the front of the unit, and/or use their software control to switch inputs, fade up titles, dissolves, etc. Screen savers, other programs running, failure to reboot, automatic updates, hard drive speed, dropped frames, etc.įor mixing video, I would use one of the Blackmagic ATEM Production Switcher products. In my experience, it's always better to use stand-alone hardware products to stream or record rather than using a computer with software, (ie OBS, Xsplit, Wirecast, etc.) With a computer, there always seems to be something that slows it down. There are a lot of options for streaming/encoding. If you can find someone upgrading to new equipment, you can get a good deal on their old. Consider purchasing tripods or other gear on eBay or other places. It is actually harder to operate cheap gear. You can use just about any HD video camera with an HDMI output but quality and features vary greatly.

Propresenter lower thirds